Water Pot B Cover – You can contact us at to inquire if we have a replacement piece in stock or you may choose to cover the water pot “B” port with another waterproof material that can block the airflow such as blue painter’s tape. If you are missing your power cord, please see the Power Cord section below. Please double check the bottom of the box and incubator as it may be in the box below the incubator. Power Cord - It is rare for the power cord to be missing from the box. If you are uncomfortable using the unit, you may want to consider replacing the incubator (see warranty section for refund option). If you would like to operate your incubator in still air mode, please make the appropriate temperature adjustments and use a secondary thermometer to check the temperature at the level of the eggs as the thermometer in the unit will only display the temperature of the air at the top of the incubator, which will be the warmest. Here is a resource on operating a still air incubator: (please note that as models of incubator vary, only some information will be applicable). If the heating element appears to be working correctly, it is still possible to have a successful hatch without a working fan, such as for “still air” incubator models.
DUCK INCUBATOR TRAYS FREE
If the fan is making noises, we recommend you unplug the unit and try to clean the fan first to ensure it is free of debris.
If you need additional information or support, please don’t hesitate to contact our consumer services team at do not have fan replacement parts we apologize for the inconvenience. A secondary humidity sensor can be used to monitor the humidity during a hatch. Please note that as the unit does not have electronically controlled humidity, the humidity level is maintained by the structure of the incubator and adding water manually, therefore the humidity reading is for informational purposes only. This can be performed by opening the incubator, gently removing the eggs, lifting the egg tray, and mopping up the excess water with a turkey baster or paper towel.
If after several hours the humidity does not decrease, you may need remove some water from the incubator. If the ambient room is a lower humidity than the incubator and you would still like to decrease the humidity in the incubator, first try opening the ventilation to the max settings and seeing if that helps to decrease the humidity. While uncommon, the humidity sensor installed in the incubator may not reflect the current humidity and may need recalibration (please contact us if needed). (Note: A humidity sensor can be purchased from the weather thermometer section of stores such as Walmart or hardware stores).Ĭheck the humidity of the incubator with a secondary humidity sensor. It can be difficult for the incubator to be a lower humidity than the ambient humidity of the room. In areas that are more humid or areas that have recently experienced rain, the ambient humidity in the room may be higher.
0 kommentar(er)
